conga-Xdebug per right
  • conga-Xdebug per right

conga-Xdebug

XTX™ 디버깅 플랫폼

  • Debug Tool for XTX
  • Plugs between the Carrier Board and XTX Module
  • USB, SATA, VGA, Power, ...

Active Filters:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.

    Specification


    The conga-Xdebug provides a debug platform for your application specific carrier board. Simply use it as a transparent debug interface between your carrier board and the XTX™ module.

    • Size: 95 x 114 mm²
    • Postcode Display for LPC or PCI
    • LPC Firmware Hub Flash (FWH)
    • 1x SATA Connector
    • Power connector for carrier board independant operation
    • VGA / Keyboard / Mouse / COM / USB
    • Power and Reset Buttons
    • LED`s
      • 4x GPIO Status
      • 4x Command Byte Enable (CBE) for PCI Bus activity
    • Temperature
      Operation: 0° to 60°C Storage-20° to + 80°C
    • Humity
      Operation: 10% to 90% Storage: 5% to 95%

    Documents

    Part Number

    041784
    conga-Xdebug

    XTX debugging platform. Including cable for COM, PS/2 and VGA.

    Technology

    Technology Leader congatec has been driving industry standards since 2005

    Support

    Engineering and support for standard and customized products in all major regions

    Customizing

    congatec Technical Services for customized design

    Contact

    Embedded in your success.
    Get in touch!