The conga-MCB/ARM is a full featured carrier board for Qseven ARM modules.

  • Mini Carrier Board for Qseven ARM
  • Complete Set of IOs
  • Dimension: 145 x 95mm

Active Filters:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.


    • 1x miniPCI Express Socket
    • 1x RJ45 connector with integrated Gigabit Ethernet Transformer
    • 1x mSATA, 1x 8 bit SD Card Socket
    • 3x USB 2.0 at the front panel
    • 1x USB 2.0 at miniPCIe connector | 1x USB 2.0 OTG
    • 1x CAN | 1x UART
    • 1x HDMI 
    • Single/Dual LVDS 18/24 bits
    • High Definition Audio with I2S Interface
    • 1x MIPI CSI-2 camera
    • FAN
    • GPIOs
    • Androids Buttons / Power Button/Reset Button/Sleep Button/LID Button
    • Input Power Voltage: 12V 
    • Temperature: Operating 0 to 60°C | Storage -55 to 90° C
    • Humidity: Operating 10 to 90% r. H. non cond. | Storage 5 to 95% r. H. non cond.
    • Dimension: 145 x 95mm


    Data Sheet

    Part Number


    Mini Carrier Board for Qseven ARM


    Technology Leader congatec has been driving industry standards since 2005


    Engineering and support for standard and customized products in all major regions


    congatec Technical Services for customized design


    Embedded in your success.
    Get in touch!