conga-SEVAL

To achieve a quick start with SMARC congatec offers an evaluation carrier board, which routes all the SMARC signals to standard interface connectors.

I/O

• 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
• 1x SATA
• 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
• 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
• 2x CAN
• GPIO
• 1x SDIO interface
• 2x I²C Bus
• 1x eSPI/SPI1 on header
• 1x SPI Bus
• 1x FAN control
• 1x Disk Drive Power Output

Internal Graphic Interface

•    2x24 bit LVDS connector shared with 2x eDP or 2xDSI

 

External Graphic Interfaces

• • 1x DP++
  • 1x HDMI

 

Audio

•    I2S Audio interface and HDA interface

 

 

Data Sheet

• conga-SEVAL.pdf
  (29.09.2017)

Manual

• User's Guide for conga-SEVAL
  (04.10.2017)
• Schematics for conga-SEVAL
  (19.12.2017)
• SEVASA0 DSN file
  (15.02.2018)

P/N	Titel	Beschreibung
007010	conga-SEVAL	Evaluation Carrier Board for SMARC 2.0 modules.