conga-SEVAL Preview image
  • conga-SEVAL Image 1
  • conga-SEVAL Image 2

conga-SEVAL

Evaluation Carrier Board compatible with SMARC modules

  • SMARC Evaluation Carrier Board
  • Reference Carrier Board

Active Filters:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.

    Specification


    To achieve a quick start with SMARC congatec offers an evaluation carrier board, which routes all the SMARC signals to standard interface connectors.
     

      I/O

      • 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
      • 1x SATA
      • 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
      • 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
      • 2x CAN
      • GPIO
      • 1x SDIO interface
      • 2x I²C Bus
      • 1x eSPI/SPI1 on header
      • 1x SPI Bus
      • 1x FAN control
      • 1x Disk Drive Power Output
         

      Ethernet

      2x Gigabit Ethernet
       

      Internal Graphic Interface

      2x24 bit LVDS connector shared with 2x eDP or 2xDSI

       

      External Graphic Interfaces

      • 1x DP++
      • 1x HDMI


      Camera Interface

      2x CSI2
       

      Audio

      I2S Audio interface and HDA interface


      Buttons and LED’s
      Power button | Reset button | Sleep button | LID button | various indication LEDs

      Feature Connector
      1x Standard congatec Feature Connector

      Postcode
      4x 7-Segment Postcode LEDs connected to GP_I2C bus

      Temperature
      Operating: -40 .. +85°C | Storage: -20 .. +80°C

      Power Input
      ATX Power Supply | 12V - 24V Wide Range Carrier Board Supply | 3.0V - 5.25V Wide Range Module Supply | USB Type C PD (12V - 20V)

      Humidity
      Operating: 10 - 90% r. H. non cond. | Storage: 5 - 95% r. H. non cond.

      Size
      294 x 172 mm

       

      Documents

      All documents found on this page are updated without notification. Always check this page for the latest version.

      Part Number

      007010
      conga-SEVAL

      Evaluation Carrier Board for SMARC 2.0 modules.

      Technology

      Technology Leader congatec has been driving industry standards since 2005

      Support

      Engineering and support for standard and customized products in all major regions

      Customizing

      congatec Technical Services for customized design

      Contact

      Embedded in your success.
      Get in touch!