conga-SEVAL

Evaluation Carrier Board for SMARC 2.0 modules

Active Filters:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.

    Specification


    To achieve a quick start with SMARC congatec offers an evaluation carrier board, which routes all the SMARC signals to standard interface connectors.

    I/O

    • 1x PCIe x4 | 1x miniPCIe | 1x PCIe x1 | 1x M.2 socket Key E
    • 1x SATA
    • 1x USB 3.0 | 1x USB 2.0 | 1x micro USB 2.0 (OTG) | 1x USB Type C with PD and DP1 via Alternate Mode
    • 2x RS-232 (1x internal RX/TX on pinheader, 1x RX/TX w/ handshake on DSUB9)
    • 2x CAN
    • GPIO
    • 1x SDIO interface
    • 2x I²C Bus
    • 1x eSPI/SPI1 on header
    • 1x SPI Bus
    • 1x FAN control
    • 1x Disk Drive Power Output


    Internal Graphic Interface

    •    2x24 bit LVDS connector shared with 2x eDP or 2xDSI

     

    External Graphic Interfaces

    • 1x DP++
    • 1x HDMI

     

    Audio

    •    I2S Audio interface and HDA interface

     

    Documents

    Part Number

    007010
    conga-SEVAL

    Evaluation Carrier Board for SMARC 2.0 modules.

    077650
    conga-SKIT

    Starterkit for SMARC 2.0 modules

    技术

    技术领导厂商德国康佳特自2005年即参与产业标准制定

     

    支持

    在全球主要地区提供标准和定制化产品工程支持

    定制化

    康佳特技术服务-定制化设计服务

     

    联系

    Embedded in your success.
    立即与我们联系!