conga-Xdebug per right
  • conga-Xdebug per right

Your item has been added to the inquiry

conga-Xdebug per right

conga-Xdebug (EOL)

XTX™ Debug Platform

Selected module variant

    Selected ecosystem parts

    Add-On Cards

      conga-Xdebug (EOL)

      XTX™ Debug Platform

      • Debug Tool for XTX
      • Plugs between the Carrier Board and XTX Module
      • USB, SATA, VGA, Power, ...

      Specification


      The conga-Xdebug provides a debug platform for your application specific carrier board. Simply use it as a transparent debug interface between your carrier board and the XTX™ module.

      • Size: 95 x 114 mm²
      • Postcode Display for LPC or PCI
      • LPC Firmware Hub Flash (FWH)
      • 1x SATA Connector
      • Power connector for carrier board independant operation
      • VGA / Keyboard / Mouse / COM / USB
      • Power and Reset Buttons
      • LED`s
        • 4x GPIO Status
        • 4x Command Byte Enable (CBE) for PCI Bus activity
      • Temperature
        Operation: 0° to 60°C Storage-20° to + 80°C
      • Humity
        Operation: 10% to 90% Storage: 5% to 95%

      Documents

      All documents found on this page are updated without notification. Always check this page for the latest version.

      Data Sheet

      15.06.2015

      Manual

      User's Guide congatec System Utility The intention of the congatec System Utility is to provide a common tool for all congatec COM (Computer on Module) products, which allows you to perform various standard and congatec specific system or BIOS configuration and modification tasks. The utility consists of six main function modules: 1. BIOS Update Module Offers functions to update the system BIOS of a congatec board. 2. Firmware Update Module Offers functions to update the firmware of the congatec board controller. 3. Panel Configuration Module Offers functions to support or ease local flat panel configuration. 4. BIOS Module Modification Module Offers functions to customize a standard congatec system BIOS by adding OEM defined BIOS modules such as boot logos, CMOS default or backup maps and OEM code or data modules. 5. BIOS/Board Information Module Offers functions to easily gather congatec specific BIOS and hardware information 6. BIOS Setup Configuration Module Offers functions to modify the standard BIOS setup menu (only supported for AMIBIOS based products).
      15.06.2015

      Ecosystem Details

      Add-On Cards

      conga-Xdebug (P/N 041784)

      XTX debugging platform. Including cable for COM, PS/2 and VGA.

      Compare products