conga-SEVAL

Evaluation Carrier Board compatible with SMARC modules

Specification

To achieve a quick start with SMARC, congatec offers an evaluation carrier board that routes all SMARC signals to standard interface connectors.

I/O	1x PCIe x4 \| 1x PCIe x1 1x M.2 socket Key B \| 1x M.2 socket Key E 1x SATA 1x SDIO interface 2x CAN \| GPIO 2x I²C Bus 1x eSPI/SPI on pin-header 1x SPI Bus 1x FAN control 1x Disk Drive Power Output
USB	1x USB 3.2 1x USB 2.0 1x micro-USB 2.0 (OTG) 1x USB Type-C with PD and DP1 via Alternate Mode
SERIAL INTERFACES	1x RS-232 (RX/TX on pin-header) 1x RS-232 (RX/TX with handshake on D-Sub 9) 2x UART on feature connector (1x RX/TX, 1x RX/TX with handshake)
ETHERNET	2x Gigabit Ethernet
INTERNAL GRAPHIC INTERFACES	2x24-bit LVDS connector shared with 2x eDP or 2x DSI
EXTERNAL GRAPHIC INTERFACES	1x DP++ 1x HDMI
CAMERA INTERFACE	1x CSI-2 4-lane 1x CSI-2 2-lane
AUDIO	1x I²S add-on card connector 1x Audio Line In and Line Out
BUTTONS AND LEDs	Power button \| Reset button \| Sleep button \| LID button Various indication LEDs
FEATURE CONNECTOR	1x Standard congatec Feature Connector
POSTCODE	4x 7-segment postcode LEDs connected to GP_I2C bus
TEMPERATURE	Operating: -40 to +85 °C Storage: -40 to +85 °C
POWER INPUT	ATX Power Supply 12–24 V Wide Range Carrier Board Supply 3.0–5.25 V Wide Range Module Supply USB Type-C PD (12–20 V)
HUMIDITY	Operating: 10–90% RH, non-condensing Storage: 5–95% RH, non-condensing
SIZE	294 x 172 mm

All documents found on this page are updated without notification. Always check this page for the latest version.

conga-SEVAL (P/N 007010)

Evaluation Carrier Board for SMARC 2.0 modules.