Nuestro ecosistema de módulos SMARC es compatible con tecnología de procesadores x86 y Arm. Está orientado a aplicaciones de alto rendimiento con limitaciones de espacio, basadas en procesadores x86 o Arm de bajo consumo. Gracias a su diseño delgado y robusto, el módulo SMARC también está perfectamente preparado para aplicaciones en vehículos.
Detalles sobre la especificación SMARC
Product Filter:
Add Filter:
There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
If you don't find the configuration you require contact your congatec Sales representative for further assistance.
If you don't find the configuration you require contact your congatec Sales representative for further assistance.
conga-SMX95
- NXP i.MX 95 processor series
- Up to 6-core ARM Cortex-A55
- NXP eIQ® Neutron NPU
- Advanced Security
- Industrial temperature support
conga-SA8
- Intel Atom x7000RE Series
- Up to 8 Cores
- Up to 16 GByte soldered LPDDR5
- Industrial temperature support
- Virtualization ready with Hypervisor
conga-STDA4
- TI processor TDA4VM or DRA829J
- Dual Arm® Cortex®-A72
- Deep learning hardware accelerator
- Arm® Cortex®-R5F MCUs for real-time communication
- Industrial temperature support
conga-SMX8-Plus
- NXP i.MX 8M Plus application processor
- Integrated Neural Processing Unit (NPU)
- Quadcore Arm® Cortex®-A53 / M7
- Up to 3 independent display outputs
- Industrial temperature support
conga-SMX8-Mini
- NXP i.MX 8M Mini application processor
- Up to quadcore Arm® Cortex®-A35
- 1x Arm® Cortex®-M4F for real-time processing
- GC NanoUltra 3D graphics
- Industrial temperature support
conga-SMX8X
- NXP MX8-X application processor
- Ultra-low power design (2-5 W)
- Up to quadcore Arm® Cortex®-A35
- 1x Arm® Cortex®-M4F for real-time processing
- Industrial temperature support
conga-SA5
- Intel Atom® x7 Intel® Pentium® or Celeron® J
- 6 variants for broad scalability
- GbE with TSN and TCC support
- Up to 8 GB LPDDR4
- Industrial temperature support
conga-SMC1/SMARC-x86
- Application-ready 3.5“ carrier
- For direct system roll-out or evaluation
- For all x86 based SMARC modules
- Executes complete SMARC I/O range
- Tailored cooling solutions available
conga-SMC1/SMARC-ARM
- Application-ready 3.5“ carrier
- For direct system roll-out or evaluation
- For all Arm based SMARC modules
- Executes complete SMARC I/O range
- Tailored cooling solutions available
conga-SEVAL
- Evaluation carrier board for SMARC
- Reference schematics on project basis
- For all Arm based SMARC modules
- 3x PCIe slots
- Executes complete SMARC I/O range
