conga-Xdebug per right
  • conga-Xdebug per right

conga-Xdebug

XTX™调试平台

  • Debug Tool for XTX
  • Plugs between the Carrier Board and XTX Module
  • USB, SATA, VGA, Power, ...

Active Filters:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.

    Specification


    The conga-Xdebug provides a debug platform for your application specific carrier board. Simply use it as a transparent debug interface between your carrier board and the XTX™ module.

    • Size: 95 x 114 mm²
    • Postcode Display for LPC or PCI
    • LPC Firmware Hub Flash (FWH)
    • 1x SATA Connector
    • Power connector for carrier board independant operation
    • VGA / Keyboard / Mouse / COM / USB
    • Power and Reset Buttons
    • LED`s
      • 4x GPIO Status
      • 4x Command Byte Enable (CBE) for PCI Bus activity
    • Temperature
      Operation: 0° to 60°C Storage-20° to + 80°C
    • Humity
      Operation: 10% to 90% Storage: 5% to 95%

    Documents

    Part Number

    041784
    conga-Xdebug

    XTX debugging platform. Including cable for COM, PS/2 and VGA.

    技术

    技术领导厂商德国康佳特自2005年即参与产业标准制定

     

    支持

    在全球主要地区提供标准和定制化产品工程支持

    定制化

    康佳特技术服务-定制化设计服务

     

    联系

    Embedded in your success.
    立即与我们联系!