conga-Xeval (P/N 019482)
Evaluationbaseboard for XTX modules.
- エコシステム
- クイック ファインダー
Your item has been added to the inquiry
conga-XEVAL (EOL)
XTX™ モジュール評価用キャリアボード
Selected module variant
Selected ecosystem parts
Carrierboards
Specification
congatec社はお客様に直ぐにXTX™を使いこなしていただくために、当社はXTX™に対応した評価用キャリアボードを提供いたします。XTX™ 全ての信号はキャリアボードにある標準コネクターと接続してあり、お客様のキャリアボードのためのXTX™の検証も直ぐにできます。
- 2x PCI Express
- 2x Express Cardソケット
- 4x 32 Bit PCI
- 1x LPT, 2x COM, 1x PS/2 キーボード & マウス
- 10/100 イーサネット
- 6x USB (Express Cardのために2つ)
- IrDAコネクター
- COM 3と4 (キャリアボードの Super I/O)
- LPT2(キャリアボードの Super I/O)
- 4x SATA, 2x IDE (Master/Slave)
- オーディオ： 追加の AC´97 Codec、SPDIFオプティカル、 Line IN/Out (ステレオ), Mic in (モノ)
Documents
All documents found on this page are updated without notification. Always check this page for
the latest
version.
Manual
User's Guide congatec System Utility
The intention of the congatec System Utility is to provide a common tool for all congatec COM (Computer on Module) products, which allows you to perform various standard and congatec specific system or BIOS configuration and modification tasks.
The utility consists of six main function modules:
1. BIOS Update Module
Offers functions to update the system BIOS of a congatec board.
2. Firmware Update Module
Offers functions to update the firmware of the congatec board controller.
3. Panel Configuration Module
Offers functions to support or ease local flat panel configuration.
4. BIOS Module Modification Module
Offers functions to customize a standard congatec system BIOS by adding OEM defined BIOS modules such as boot logos, CMOS default or backup maps and OEM code or data modules.
5. BIOS/Board Information Module
Offers functions to easily gather congatec specific BIOS and hardware information
6. BIOS Setup Configuration Module
Offers functions to modify the standard BIOS setup menu (only supported for AMIBIOS based products).
15.06.2015
15.06.2015
15.06.2015
15.06.2015
15.06.2015
15.06.2015
Image
15.06.2015
15.06.2015
15.06.2015
15.06.2015
Application Note
AN7 External BIOS Update
This AN describes how to update the congatec Embedded BIOS from an external FWH or SPI flash device
30.10.2024
AN14 ETX XTX Mounting Solutions
This Application Note is intended to explain how the embedded BIOS of the congatec CPU modules can be forced to load the BIOS defaults settings (manufacturer settings)when the BIOS setup was changed in a way that the module is not able to boot anymore.
15.06.2015
Data Sheet
15.06.2015
Software
Via AC97 Audio Driver for VT1616 codec (located on conga-CEVAL)
Via AC97 Audio Driver for VT1616 codec (located on conga-CEVAL)
Ecosystem Details
Carrierboards
Accessories
conga-FPA2 (EOL)
汎用フレットパネルアダプタボード
conga-LDVI
LVDSからDVIへ変更モジュール
