conga-MCB/Qseven-ARM

The conga-MCB/ARM is a full featured carrier board for Qseven ARM modules.

  • Mini Carrier Board for Qseven ARM
  • Complete Set of IOs
  • Dimension: 145 x 95mm

Active Filters:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.

    Specification


    • 1x miniPCI Express Socket
    • 1x RJ45 connector with integrated Gigabit Ethernet Transformer
    • 1x mSATA, 1x 8 bit SD Card Socket
    • 3x USB 2.0 at the front panel
    • 1x USB 2.0 at miniPCIe connector | 1x USB 2.0 OTG
    • 1x CAN | 1x UART
    • 1x HDMI 
    • Single/Dual LVDS 18/24 bits
    • High Definition Audio with I2S Interface
    • 1x MIPI CSI-2 camera
    • FAN
    • GPIOs
    • Androids Buttons / Power Button/Reset Button/Sleep Button/LID Button
    • Input Power Voltage: 12V 
    • Temperature: Operating 0 to 60°C | Storage -55 to 90° C
    • Humidity: Operating 10 to 90% r. H. non cond. | Storage 5 to 95% r. H. non cond.
    • Dimension: 145 x 95mm

    Documents

    Data Sheet

    Part Number

    020734
    conga-MCB/Qseven-ARM

    Mini Carrier Board for Qseven ARM

    テクノロジー

    2005年より規格標準化を推進してきた、テクノロジーをリードするコンガテック

     

    サポート

    標準品とカスタム品のエンジニアリングとサポート

    カスタマイズサービス

    カスタムデザインの技術サポート

     

    お問い合わせ

    congatecで未来に向けた準備を万全に。

    今すぐご連絡ください!