SMARC Module Ecosystem

The ideal platform for size, weight, power and cost-optimized AI applications at the rugged edge

Our SMARC Module ecosystem supports both x86 and Arm processor technology. It targets the high-performance range of space-constrained applications based on low-power x86 or Arm processors. With its slim and rugged design, SMARC Module is also well prepared for in-vehicle applications.
 

Details about the SMARC Specification

 

Product Filter:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.
    More about conga-SMX95

    conga-SMX95

    • NXP i.MX 95 processor series
    • Up to 6-core ARM Cortex-A55
    • NXP eIQ® Neutron NPU 
    • Advanced Security
    • Industrial temperature support
    More about conga-SA8

    conga-SA8

    Virtualization Ready
    • Intel Atom x7000RE Series
    • Up to 8 Cores
    • Up to 16 GByte soldered LPDDR5
    • Virtualization ready with RTS Hypervisor
    • Industrial temperature support 
    More about conga-STDA4

    conga-STDA4

    • TI processor TDA4VM or DRA829J
    • Dual Arm® Cortex®-A72
    • Deep learning hardware accelerator
    • Arm® Cortex®-R5F MCUs for real-time communication
    • Industrial temperature support
    More about conga-SMX8-Plus

    conga-SMX8-Plus

    • NXP i.MX 8M Plus application processor
    • Integrated Neural Processing Unit (NPU)
    • Quadcore Arm® Cortex®-A53 / M7
    • Up to 3 independent display outputs
    • Industrial temperature support
    More about conga-SA7

    conga-SA7

    Virtualization Ready
    • Intel Atom® x6000E, Intel® Pentium® or Celeron® J
    • 8 variants for broad scalability
    • GbE with TSN and TCC support
    • Up to 16 GB LPDDR4x
    • Industrial temperature support
    More about conga-SMX8-Mini

    conga-SMX8-Mini

    • NXP i.MX 8M Mini application processor
    • Up to quadcore Arm® Cortex®-A35
    • 1x Arm® Cortex®-M4F for real-time processing
    • GC NanoUltra 3D graphics
    • Industrial temperature support
    More about conga-SMX8X

    conga-SMX8X

    • NXP MX8-X application processor
    • Ultra-low power design (2-5 W)
    • Up to quadcore Arm® Cortex®-A35
    • 1x Arm® Cortex®-M4F for real-time processing
    • Industrial temperature support
    More about conga-SA5

    conga-SA5

    • Intel Atom® x7 Intel® Pentium® or Celeron® J
    • 6 variants for broad scalability
    • GbE with TSN and TCC support
    • Up to 8 GB LPDDR4
    • Industrial temperature support
    More about conga-SMC1/SMARC-x86

    conga-SMC1/SMARC-x86

    • Application-ready 3.5“ carrier
    • For direct system roll-out or evaluation
    • For all x86 based SMARC modules
    • Executes complete SMARC I/O range
    • Tailored cooling solutions available
    More about conga-SMC1/SMARC-ARM

    conga-SMC1/SMARC-ARM

    • Application-ready 3.5“ carrier
    • For direct system roll-out or evaluation
    • For all Arm based SMARC modules
    • Executes complete SMARC I/O range
    • Tailored cooling solutions available
    More about conga-SEVAL

    conga-SEVAL

    • Evaluation carrier board for SMARC
    • Reference schematics on project basis
    • For all Arm based SMARC modules
    • 3x PCIe slots
    • Executes complete SMARC I/O range