conga-SKIT/ARM i.MX8

Starter Kit for congatec SMARC 2.0 Development

  • Starter Kit for SMARC 2.0 Development
  • All accessories out of the box
  • Immediate evaluation for SMARC 2.0

Active Filters:

    Add Filter:

    There are 1,000's of possible configurations of our products, and therefore every possible configuration may not be shown with this tool.
    If you don't find the configuration you require contact your congatec Sales representative for further assistance.



    • conga-SEVAL
      Evaluation carrier board for standard SMARC modules based on SMARC Specification 2.0
    • conga-SMX8/i-QCM-6GB eMMC16
      SMARC 2.0 module with NXP i.MX8 QuadMax application processor, 1 MB L2 cache, 6 GB LPDDR4 onboard memory and 16 GB onboard HS400 eMMC.
    • conga-SMX8/i-CSP-B
      Passive cooling solution. All stand-offs are bore hole 2.7mm
    • conga-SMX/i-HSP-B
      Standard heatspreader. All stand-offs are bore hole 2.7mm
    • Cable Set 
      Complete set of cables to connect all components
    • ATX Power Supply 
      FSP180-50L max. 180 W (150 x 81.5 x 40.5 mm)
    • USB 2.0 to Serial Adapter
      USB 2.0 to Serial Adapter DSUB9 based on FTDI FT232
    • conga-ACAM/JAL-2721 
      MIPI camera module adapter with camera JAL2721. Image sensor OV5640. MIPI CSI-2.
    • conga-LDVI/EPI
      LVDS to DVI converter board for digital flat panels with onboard EEPROM
    • MicroSDHC-Card UHS-I
      8GB - Kingston industrial SDCIT/EU Class 10 with preinstalled image.


    Part Number

    conga-SKIT/ARM i.MX8

    SMARC 2.0 IoT Development Kit based on conga-SMX8 with NXP i.MX8 series processor and conga-SEVAL SMARC reference carrier. Ready to use SMARC 2.0 development platform. Accessory and quick start guide included.


    Technology Leader congatec has been driving industry standards since 2005


    Engineering and support for standard and customized products in all major regions


    congatec Technical Services for customized design


    Embedded in your success.
    Get in touch!