This AN describes how to update the congatec Embedded BIOS from an external FWH or SPI flash device

CGUTIL: This application note describes how to create and add OEM CMOS default maps with the congatec System Utility tool.

This application note is a short example of how to calculate the maximum battery service time when a specified RTC circuit battery type must be used. Additionally, it also describes how to determine the required RTC circuit battery capacity when a specified battery service time is required.

CGUTIL: This application note describes how to create and add a OEM Bootlogo to the congatec embedded BIOS using the congatec System Utility tool.

CGUTIL: This Application Note is intended to explain how EPI (Embedded Panel Interface) display configuration files can be created or modified with the congatec System Utility tool.

This Application Note is a short example of how to setup and configure a system to operate in RAID Level1 (Mirror) with two Serial ATA hard disk drives while using Microsoft Windows XP.

This AN describes how to create and add a HDA verb table module to a congatec BIOS

This Application Note provides information and an example about how to create and add an OEM ACPI SLIC table module into the BIOS of either a XTX, COM Express or

Qseven CPU module.

This Application Note provides information about the installation of Windows XP or Windows 7 when a USB powered CDROM does not work.

This Application Note provides implementation details for Intel EMGD graphic drivers on

Topcliff modules.

This AN describes how to create a bootable USB stick with UEFI shell

This AN describes how the Installation and Update of NXP MFGTool and congatec Bootloader Profiles works

AN34 OEM SMBIOS/DMI tables

This AN describes OEM Setup Modification

评估最新NXP i.MX 8 QuadMax处理器的最佳利器