Application Notes conga-X855
AN01 BIOS Update
CGUTIL: This Application Note provides information about updating the embedded BIOS on all congatec modules and how to backup the BIOS of a specific module to a file. November 13, 2006 |
AN02 Remote Control
This application note describes how the Remote Access is supported by the congatec Embedded BIOS (based on AMIBIOS 8) and can be used to control and configure systems on where there is no monitor, LCD or keyboard connected. August 25, 2006 |
AN03 Watchdog
This application note describes the Watchdog feature found on congatec AG modules. It explains the full feature set, however some items may not be applicable for systems which do not support all Watchdog features. September 22, 2006 |
AN05 BIOS Update and Write Protection
CGUTIL: This Application Note explains the benefits and describes the security feature called October 31, 2006 |
AN06 BIOS Recovery
This application note describes how to recover the congatec Embedded BIOS on congatec CPU modules. December 4, 2006 |
AN07 FWH BIOS update
This application note describes how to update the congatec Embedded BIOS from an external FWH August 25, 2006 |
AN08 Create OEM Default Map
CGUTIL: This application note describes how to create and add OEM CMOS default maps with the congatec System Utility tool. October 19, 2007 |
AN09 RTC Battery Lifetime
This application note is a short example of how to calculate the maximum battery service time when a specified RTC circuit battery type must be used. Additionally, it also describes how to determine the required RTC circuit battery capacity when a specified battery service time is required. October 4, 2006 |
AN10 BIOS Setup Configuration
CGUTIL: This Application Note is intended to explain how the congatec Embedded BIOS Setup program can be customized and adapted to the requirements of a particular application. The customization of the BIOS Setup program can be done using the congatec System Utility tool. November 8, 2006 |
AN11 Create and add Bootlogo
CGUTIL: This application note describes how to create and add a OEM Bootlogo to the congatec embedded BIOS using the congatec System Utility tool. August 16, 2011 |
AN12 Modify EPI File
CGUTIL: This Application Note is intended to explain how EPI (Embedded Panel Interface) display configuration files can be created or modified with the congatec System Utility tool. December 3, 2008 |
AN13 Load BIOS Setup Defaults
This Application Note is intended to explain how the embedded BIOS of the congatec CPU modules can be forced to load the BIOS defaults settings (manufacturer settings)when the BIOS setup was changed in a way that the module is not able to boot anymore. December 22, 2006 |
AN14 ETX XTX Mounting Solutions
This Application Note provides information about the mounting solutions (heatspreader - CPU module - baseboard) that are possible with congatec XTX or ETX modules. October 23, 2008 |