CGUTIL: This Application Note provides information about updating the embedded BIOS on all congatec modules and how to backup the BIOS of a specific module to a file
This application note describes how the Remote Access is supported by the congatec Embedded BIOS (based on AMIBIOS 8) and can be used to control and configure systems on where there is no monitor, LCD or keyboard connected.
This application note describes the Watchdog feature found on congatec AG modules. It explains the full feature set, however some items may not be applicable for systems which do not support all Watchdog features.
This Application Note provides information about the restraints on the congatec ETX modules, when it is used in the ETX Evaluation Baseboard EEV-EX01 from Evalue Technology Inc., and how they can be eliminated.
CGUTIL: This Application Note explains the benefits and describes the security feature called
This application note describes how to recover the congatec Embedded BIOS on congatec CPU modules.
This AN describes how to update the congatec Embedded BIOS from an external FWH or SPI flash device
CGUTIL: This application note describes how to create and add OEM CMOS default maps with the congatec System Utility tool.
This application note is a short example of how to calculate the maximum battery service time when a specified RTC circuit battery type must be used. Additionally, it also describes how to determine the required RTC circuit battery capacity when a...
CGUTIL: This Application Note is intended to explain how the congatec Embedded BIOS Setup program can be customized and adapted to the requirements of a particular application. The customization of the BIOS Setup program can be done using the...
CGUTIL: This application note describes how to create and add a OEM Bootlogo to the congatec embedded BIOS using the congatec System Utility tool.
CGUTIL: This Application Note is intended to explain how EPI (Embedded Panel Interface) display configuration files can be created or modified with the congatec System Utility tool.
This Application Note is intended to explain how the embedded BIOS of the congatec CPU modules can be forced to load the BIOS defaults settings (manufacturer settings)when the BIOS setup was changed in a way that the module is not able to boot...
This Application Note provides information about the mounting solutions (heatspreader - CPU module - baseboard) that are possible with congatec XTX or ETX modules.
This Application Note is a short example of how to setup and configure a system to operate in RAID Level1 (Mirror) with two Serial ATA hard disk drives while using Microsoft Windows XP.
This application note provides information about implementing a HDMI or DisplayPort interface on COM Express™ carrier boards.
conga-CA,conga-CAx and conga-QAguide how to configure the USB client port on congatec modules
This Application Note provides information and an example about how to create and add an OEM ACPI SLIC table module into the BIOS of either a XTX, COM Express orQseven CPU module.
This Application Note provides information about the installation of Windows XP or Windows 7 when a USB powered CDROM does not work.
This Application Note provides implementation details for Intel EMGD graphic drivers onTopcliff modules.